In either orientation the cooler is going to have an exhaust fan on the other side close by sucking air through, so this would be kind of like a push/pull setup. My thoughts were that I should reverse the direction of the fan so it blows into the heatsink rather than sucks out of it. There will be 3 intake fans in this case, two on the front panel (below the 5.25" bays) and one on the side blowing into the graphics card. You should be able to plug the cable for the fans RGB to the board since it does state that the cooler is compatible with Gigabytes RGB Fusion app. I have some options with this cooler, including reversing the fan direction and rotating the whole thing 90 degrees. It could be blowing hot air over the RAM and onto the hard drives. The fan sucking air through the cooler seems to be competing with the exhaust fan for air (they are going in different directions).ģ. The size of this thing seems to be blocking airflow from the case through the top exhaust fan.Ģ. Once the retention plate is pushed through the coolers central gap and configured for the correct socket, you simply screw its spring-loaded. I am inexperienced with cooling stuff so I thought I would ask you guys for help. The orientation you see is how the cooler's instructions showed it. DIMENSIONS (L X W X H): 120 x 79.6 x 158.8 mm / 4.7 x 3.1 x 6.As you can see, the cooler is right in the top back corner of the case, near the two exhaust fans. The Hyper 212 RGB Black Edition offers better installation and great performance, easily one of the best air cooling solutions.The sleek jet black not only makes it look great but also increases cooling performance. On bootup it is lighting briefly and then turns off and I can't control the rgb on the cooler master fan. The aluminum top cover and nickel-plated jet black fins, give the Hyper 212 RGB Black Edition a premium aesthetic appeal. I recently installed a Cooler Master Hyper 212 evo RGB black edition, and connected the rgb fan cable to the 12 v rgb header on my motherboard properly (the arrow was pointing to the 12v header upon installation). Mini CPU Air Cooler: Jonsbo CR1400 RGB CPU Air Cooler is armed with 41 pieces of fins. The Hyper 212 RGB Black Edition offers better installation and great performance, easily one of the best air cooling solutions. Second best air cooler: Cooler Master Hyper 212 Black Edition. Cooler Master Cooler Master Hyper 212 RGB CPU Cooler - Black Edition - CPU Socket: LGA2066, LGA2011-v3. The legendary Hyper air cooler is back and better than before. How To Install AMD AM4 Ryzen CPU For Beginners.
0 kommentar(er)
